Bad bunker risk will rise in 2020: Bunker states must take action
Overview
Recent reports of a rise in fuel contamination cases have increased the industry’s concerns over quality and safety of blended fuels as 2020 approaches. And for a good reason. A spike in demand for new low sulphur blends from 1 January 2020 will greatly increase the risk of contamination. Lars Robert Pedersen, Deputy Secretary General of BIMCO calls for bunker states to take responsibility.
When the IMO’s 0.5% sulphur limit comes into force in 16 months, blending will increase significantly. Suppliers will have to blend the traditional heavy fuel with a lot of lighter refined products - products which are often cheap and of rather poor quality - to reduce the level of sulphur.
“The risk that the new low sulphur fuel is not of the quality that it should be, and that it will cause operational problems, is bound to increase with the new sulphur regulation. The low sulphur fuel products needed on 1 January 2020 are not developed yet. The suppliers do not know yet what they will look like or what blending components will go in there. That is a concern,” says Lars Robert Pedersen.
Bunker states must step up
While prevention of potential contamination cases is difficult, the shipping industry can, and should, call on bunker states to take responsibility when suppliers hosted in their state are caught supplying bad fuel.
“Bunker states have committed under the MARPOL Annex VI to take action against suppliers in their territory, if they supply fuel that is different from what they declare. Should the bunker fuel delivered not match the bunker delivery note, the states have an enforcement obligation. Unfortunately, this is not really happening and therefore, there is little consequence if a supplier is caught supplying bad bunker fuel. That is unsatisfactory,” says Lars Robert Pedersen and adds:
“By states taking legal action - like they have committed to do - every time contaminated and unsuitable fuel is distributed, it would become too expensive for the suppliers to continue this practice. It is not a 100% guarantee, but the shipping industry needs proof that states will take this serious ahead of 2020. It needs to change,” he says.
A few ways for shipowners and operators to try to anticipate and prevent operational problems is to place all new fuel in empty tanks. Doing a full analysis and screenings for known contaminants of the product is also a way to try and prevent operational problems from contaminated fuel. This should ideally be done before the fuel is received. If that is not possible, it should be done after bunkering and always before the fuel is used onboard.
Feedback or a question about this information?
Posted:
04 September 2018
VPS Bunker Alerts
Veritas Petroleum Services (VPS) publish regular Bunker Alerts based entirely on fuel samples and have kindly permitted BIMCO’s Members to access this information.
The Bunker Alerts are not intended to be an evaluation of overall bunker quality in the port or area concerned, but usually highlight a specific parameter within the fuel which has raised a quality issue.
Latest ice reports for members
Latest piracy reports
Latest industry releasable threats
Related publication
Independent testing & certification of in-water cleaning companies
The procedure replaces the “Approval procedure for in-water cleaning companies". It was written:ELSEWHERE ON BIMCO
Contracts & Clauses
All of BIMCO's most widely used contracts and clauses as well as advice on managing charters and business partners.
Learn about your cargo
For general guidance and information on cargo-related queries.
BIMCO Publications
Want to buy or download a BIMCO publication? Use the link to get access to the ballast water management guide, the ship master’s security manual and many other publications.
About a new business partner
We can help members check new business partners. We also help to recover millions of USD (undisputed) funds every year.
